Product Description:
A laboratory fume hood is a device used to control harmful gases, vapors, dust, or aerosols, designed to protect laboratory personnel and the environment.
The structure
- Cabinet: usually made of corrosion-resistant materials (such as stainless steel, polypropylene), with chemical resistance.
- Front window: clear glass that moves up and down, easy to operate and prevent harmful substances from leaking out.
- Work area: Interior space for laboratory equipment and chemicals, equipped with outlets, air valves and other facilities.
- Exhaust system: Connect the external exhaust duct to discharge harmful gases.
Features:
Security protection
Control of hazardous substances: Effective control of hazardous gases, vapors, dusts and aerosols to prevent their diffusion into the laboratory environment.
Operator protection: Through the front window and air flow system, the experimental personnel are protected from direct contact with harmful substances.
Air flow control
Stable air flow: Adjust the wind speed through the front window opening to ensure that harmful substances are effectively discharged.
Negative pressure environment: Maintain negative pressure in the cabinet to prevent harmful substances from leaking out.
Exhaust system
Efficient exhaust: harmful gases are discharged outdoors through the exhaust system or recycled after filtration.
A variety of exhaust modes: including ducted (pipe exhaust) and ductless (no pipe filtration) two main types.
Technical Parameters:
Material Parameters
Cabinet material:
Corrosion-resistant materials (e.g., stainless steel, polypropylene, epoxy). Chemical corrosion resistance meets the experimental requirements.
Front window material:
Safety glass or polycarbonate with impact and chemical resistance.
Lining material:
Acid and alkali resistant, high temperature resistant material, easy to clean.
Electrical Parameters
Power supply configuration:
Voltage: 220V/110V, 50/60 Hz. Socket: Built-in explosion-proof socket, in line with electrical safety standards.
Lighting:
LED lighting, uniform brightness, low energy consumption. Lighting intensity: ≥500 lux to ensure that the experimental operation is clearly visible.
Control System
Wind speed control:
Manual or automatic adjustment of surface wind speed. Equipped with wind speed sensor and alarm system to ensure stable airflow.
Variable Air Volume (VAV) control:
Automatically adjust the exhaust air volume according to the position of the front window, saving energy and high efficiency.
| | | | |
| | | | |
| | | | |
Safety maximum opening size(mm) | |
| | | | |
| | |
| | | | |
Working min opening size(mm) | |
| | | | |
| | | | |
| | 220v 10A 4pcs or customized |
| | |
| | |
| Name | Ceramic | Epoxy resin board | Phenolic | |
| Composition | Natural Silicate | Epoxy resin, silica, hardener, pigment | Chemical resistant film, overlay paper, deco paper, Kraft paper | |
| Max. Long term Heat Resistance | 800°C | 300°C | 135°C | |
| Chemical Resistance | Strong resistance against solvents, bases, oxidants and most acids | Strong resistance against solvents, bases, and most oxidants | Strong resistance against solvents, oxidants, and many acids | |
Applications:
Chemical experiments involve the handling of volatile chemicals, which require careful attention and precision to avoid accidents. It is crucial to follow safety protocols and wear appropriate protective gear when conducting experiments with these substances.
In biological experiments, one of the key focuses is to prevent biological contamination. Scientists and researchers must maintain strict sterile conditions to ensure that the results are accurate and untainted by external factors. Proper handling of specimens and equipment is essential to minimize the risk of contamination.
Within the pharmaceutical industry, there is a need to control dust and harmful gases to maintain a safe and clean working environment. Dust particles and noxious gases can have detrimental effects on both the products being manufactured and the health of the employees. Implementing effective ventilation systems and regular monitoring are essential in controlling these hazards.
Customization:
Product Customization Services for Steel Fume Hood
Brand Name: TOPFEA
Model Number: TFFH001
Place of Origin: Guangdong of China
Certification: ISO
Minimum Order Quantity: 1PCS
Price: USD800~1200
Packaging Details: Carton/Wooden case
Delivery Time: 15~25days
Payment Terms: TT, LC
Supply Ability: 1000PCS per month
Size: 1200/1500/1800*800/850*2350mm Or Customized
Maintenance: Low
Table top: Phenolic Resin, Ceramic Or Customized
Airflow: High
Durability: High
Packing and Shipping:
Product Packaging:
The Steel Fume Hood is carefully packaged in a sturdy cardboard box with ample protective padding to ensure safe transportation. All components are securely placed within the box to prevent any damage during shipping.
Shipping:
Orders for the Steel Fume Hood are typically shipped within 1-2 business days after payment confirmation. We use trusted shipping carriers to deliver the product to your designated address. Tracking information will be provided so you can monitor the status of your delivery.
FAQ:
Q: What is the brand name of this Steel Fume Hood product?
A: The brand name is TOPFEA.
Q: What is the model number of this Steel Fume Hood?
A: The model number is TFFH001.
Q: Where is this Steel Fume Hood manufactured?
A: It is manufactured in Guangdong of China.
Q: Does this Steel Fume Hood come with any certification?
A: Yes, it comes with ISO certification.
Q: What is the minimum order quantity for purchasing this Steel Fume Hood?
A: The minimum order quantity is 1 piece.
