Product Description:
Laboratory Fume Hood
A laboratory fume hood is a device used to control harmful gases, vapors, dust, or aerosols, designed to protect laboratory personnel and the environment.
The Structure
Cabinet: usually made of corrosion-resistant materials (such as stainless steel, polypropylene), with chemical resistance.
Front Window: clear glass that moves up and down, easy to operate and prevent harmful substances from leaking out.
Work Area: interior space for laboratory equipment and chemicals, equipped with outlets, air valves and other facilities.
Exhaust System: connect the external exhaust duct to discharge harmful gases.
Features:
Security protection
Control of hazardous substances: Effective control of hazardous gases, vapors, dusts, and aerosols to prevent their diffusion into the laboratory environment.
Operator protection: Through the front window and air flow system, the experimental personnel are protected from direct contact with harmful substances.
Air flow control
Stable air flow: Adjust the wind speed through the front window opening to ensure that harmful substances are effectively discharged.
Negative pressure environment: Maintain negative pressure in the cabinet to prevent harmful substances from leaking out.
Exhaust system
Efficient exhaust: harmful gases are discharged outdoors through the exhaust system or recycled after filtration.
A variety of exhaust modes: including ducted (pipe exhaust) and ductless (no pipe filtration) two main types.
Technical Parameters:
Material parameters
Cabinet material:
Corrosion-resistant materials (e.g., stainless steel, polypropylene, epoxy).
Chemical corrosion resistance meets the experimental requirements.
Front window material:
Safety glass or polycarbonate with impact and chemical resistance.
Lining material:
Acid and alkali resistant, high temperature resistant material, easy to clean.
Electrical parameters
Power supply configuration:
Voltage: 220V/110V, 50/60 Hz.
Socket: Built-in explosion-proof socket, in line with electrical safety standards.
Lighting:
LED lighting, uniform brightness, low energy consumption.
Lighting intensity: ≥500 lux to ensure that the experimental operation is clearly visible.
Control system
Wind speed control:
Manual or automatic adjustment of surface wind speed.
Equipped with wind speed sensor and alarm system to ensure stable airflow.
Variable Air Volume (VAV) control:
Automatically adjust the exhaust air volume according to the position of the front window, saving energy and high efficiency.
| | | | |
| | | | |
| | | | |
Safety maximum opening size(mm) | |
| | | | |
| | |
| | | | |
Working min opening size(mm) | |
| | | | |
| | | | |
| | 220v 10A 4pcs or customized |
| | |
| | |
| Name | Ceramic | Epoxy resin board | Phenolic | |
| Composition | Natural Silicate | Epoxy resin, silica, hardener, pigment | Chemical resistant film, overlay paper, deco paper, Kraft paper | |
| Max. Long term Heat Resistance | 800°C | 300°C | 135°C | |
| Chemical Resistance | Strong resistance against solvents, bases, oxidants and most acids | Strong resistance against solvents, bases, and most oxidants | Strong resistance against solvents, oxidants, and many acids | |
Applications:
Chemical experiments: Managing volatile chemicals is essential for safety in the laboratory setting. Proper handling, storage, and disposal procedures must be followed to minimize the risk of accidents and exposure to hazardous substances.
Biological experiments: Preventing biological contamination is crucial when working with living organisms or biological materials. Maintaining aseptic techniques, using sterilized equipment, and following strict hygiene practices are important measures to avoid contamination and ensure the integrity of research results.
Pharmaceutical: Controlling dust and harmful gases is imperative in pharmaceutical manufacturing to maintain product quality and ensure the safety of workers. Implementing effective ventilation systems, proper dust containment measures, and monitoring air quality are critical aspects of controlling these hazards in the pharmaceutical industry.
Customization:
Product Customization Services for the Steel Fume Hood:
- Brand Name: TOPFEA
- Model Number: TFFH001
- Place of Origin: Guangdong of China
- Certification: ISO
- Minimum Order Quantity: 1PCS
- Price: USD800~1200
- Packaging Details: Carton/Wooden case
- Delivery Time: 15~25days
- Payment Terms: TT, LC
- Supply Ability: 1000PCS per month
- Material: Steel
- Safety Features: Yes
- Size: 1200/ 1500/ 1800*800/ 850*2350mm Or Customized
- Table top: Phenolic Resin, Ceramic Or Customized
- Product Name: Steel Fume Hood
Keywords: Steel Fume Extracting Hood, Air Purifying Hood, Fume Extraction Hood
Packing and Shipping:
Product Packaging:
The Steel Fume Hood is carefully packaged in a sturdy cardboard box to ensure its safe delivery. The product is wrapped in protective foam padding to prevent any damage during transit.
Shipping:
Once your order is processed, the Steel Fume Hood will be shipped using a reliable courier service. You will receive a tracking number to monitor the delivery status of your package.
FAQ:
Q: What is the brand name of this Steel Fume Hood product?
A: The brand name is TOPFEA.
Q: What is the model number of this Steel Fume Hood product?
A: The model number is TFFH001.
Q: Where is this Steel Fume Hood product manufactured?
A: It is manufactured in Guangdong of China.
Q: Does this Steel Fume Hood product come with any certification?
A: Yes, it is certified with ISO.
Q: What is the minimum order quantity for this Steel Fume Hood product?
A: The minimum order quantity is 1 piece.
